Siloxane based water repellent impregnation Class

    A one part solvent based water repellent impregnation for absorbent cementitious substrates. It penetrates well into the open pores of the substrate, providing durable water repellency, while still allowing water vapour diffusion in both directions.

• Reduction of capillary water absorption.
• Reduces efflorescence.
• Reduces dirt penetration into the pores.

Used as water repellent and colourless protective surface treatment absorbent exposed materials such as concrete, cementitious rendering, concrete tiles, fibre cement, brickwork (clay and lime sand, non-vitrified), natural stone etc. Can also be used as hydrophobic primer under solvent based or water based protective coatings. Used as water-repellent impregnation (hydrophobic treatment) for absorbent substrates such as concrete in civil engineering or building concrete structures. Suitable for protection against ingress (Principle 1, method 1.1 of EN 1504-9) Suitable for moisture control(Principle 2, method 2.1 of EN 1504-9)Suitable for increasing the resistivity(Principle 8, method 8.1 of EN 1504-9)  

Advantages

• Reduction of capillary water absorption.
• Reduces efflorescence.
• Reduces dirt penetration into the pores.
• Improves thermal insulation.
• Can be overcoated with solvent based and dispersion coating.
• Higher durability and resistance than conventional silicone based treatments.
• Does usually not change the appearance of the substrate.
•  Reduces chloride ion ingress and movement.
•  Does not act as a vapour barrier.